Harson.ai

Reticle library · Leupold

Leupold Illuminated FFP TMR (Tactical Milling Reticle)

Drawn to scale from Leupold’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.

10 20 30
Leupold Illuminated FFP TMR (Tactical Milling Reticle) — first focal plane, MRAD subtensions, 2–25×

Drawn from Leupold & Stevens, Inc.’s published specification.

The numbers

Manufacturer
Leupold
Reticle
Illuminated FFP TMR (Tactical Milling Reticle)
Focal plane
first focal plane
Units
MRAD
Magnification
2–25×

In the first focal plane the subtensions hold true at every magnification, so a hold is a hold wherever the zoom ring sits.

Subtensions

Official 2021 Reticles PDF page 12. Published differences vs non-illum FFP TMR: 0.10 MIL center-dot diameter; 0.10 MIL illuminated fine-line weight; hash lengths on the inner illuminated stadia labeled 0.50 / 0.25 MIL. Medium 0.20 MIL, heavy 0.40 / 0.75 MIL, 2.50 MIL outer spacing, numbered 10 / 20 / 30 — same as non-illum. Illumination: official 2021 Reticles PDF prints the illuminated portion of this reticle in red (inner stadia / hashes / center; heavy outer posts remain black). Colour taken from that overlay. Leupold does not print a separate “illuminationColors” sentence on this page.

How this one was checked

Rebuilt and verified 11 Sep 2026 from the 2021 Leupold Reticles catalogue, page 12, at 400 dpi. Scale 60.0 px/MIL from the 0.50 MIL mark spacing, confirmed by the 0.20 MIL fine scale measuring 12 px. Leupold's catalogue is the best source of the four brands worked so far — a properly dimensioned drawing with values called out on the artwork itself, so measurement and published figure check each other line by line, and every measurement below matches a printed callout. MEASURED (callout in brackets): centre dot 0.10 [0.10MIL Dot Diameter]; arms clear to +/-0.25; line weights 0.10 fine [0.10MIL Fine Lines], 0.18 medium [0.20MIL Medium Lines], 0.42 heavy [0.40MIL]; marks every 0.50 MIL from 0.5 to 4.0 with whole mils 0.48-0.50 and halves 0.23-0.27 [0.50MIL / 0.25MIL]; a 0.20-spaced fine ranging scale from 4.2 to 4.8 [0.20MIL]; marks every 1.00 MIL from 5 to 10 at 0.72 long [1.00MIL / 0.75MIL]; heavy stadia below 10 with marks every 2.50 MIL, 0.72 on the odd 2.5s and 0.95 on the multiples of 5 [2.50MIL / 0.75MIL Heavy Lines / 1.00MIL]; numerals at 10, 20 and 30. The illuminated section ends at exactly 10 MIL — checked either side, red at 10.0 and black at 10.5.

Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Leupold.