Reticle library · Nightforce
Drawn to scale from Nightforce’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 40 MOA — the part of the reticle you aim with. This reticle carries marks out to 60 MOA; the rest sits beyond the edge of this drawing.
Drawn from Nightforce Optics, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
MOAR second focal plane, 20 MOA of elevation below centre. Letters (all models): A=40, C=.5 odd / D=2 even vertical marks (centred), E=4 the 10/20 marks, F=1 pitch, G=2 the lit floating centre cross (stadia resume at 2), K=.5 odd / L=1 even horizontal marks hanging below the line, M=1 gap to each post tip, N=2 the +/-2, +/-20 and end marks. Nightforce MOAR Reticle Sheet 2026 (REV 0126) page 2, per-model chart column 'NX6 24x': B=1.72 post, H=0.1 line, I=0.25 rail, J=0.69 vertical numerals, O=0.55 horizontal numerals. Elevation +10 / -20; posts at 3, 6 and 9 o'clock. Reference magnification 24x: the chart labels the column 24x; Nightforce's NX6 F2 sheets state 'all subtensions measured at maximum magnification'. Geometry checked against moar-20moa-illumin-specifications.png on Nightforce's 'MOAR - 20 MOA Illuminated' specifications page.
Verified 9 Oct 2026. Letters from Nightforce MOAR Reticle Sheet 2026 (REV 0126) page 2, per-model chart column 'NX6 24x'; geometry checked against Nightforce's own dimensioned 20 MOA drawing (moar-20moa-illumin-specifications.png on Nightforce's 'MOAR - 20 MOA Illuminated' specifications page, cached under specs/nightforce/web/), measured on the raster at 57.31 px/MOA: every one of 28 vertical and 38 horizontal marks matches the rule in length and side (horizontal hanging below, vertical centred; drawing drift up to 0.22 MOA, positions follow F=1), elevation ends at -20 with a 2 MOA end mark, post tips at 21 / 21.0 (M=1), hollow channel to 24.0 (sides) / 24.0 (bottom), measured. The drawing uses one generic weight; B, H, I, J, O are this model's published column. All letters A-O represented.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Nightforce.