Reticle library · Nightforce
Drawn to scale from Nightforce’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 40 MOA — the part of the reticle you aim with. This reticle carries marks out to 60 MOA; the rest sits beyond the edge of this drawing.
Drawn from Nightforce Optics, Inc.’s published specification.
In the first focal plane the subtensions hold true at every magnification, so a hold is a hold wherever the zoom ring sits.
Nightforce MOAR (First Focal Plane) reticle sheet (2017, 6/20) page 2, MOA, all models: A=40 windage scale, B=1.7188 post height, C=.5 odd and D=2 even vertical marks, E=4 the 10/20 marks, F=1 pitch, G=2 floating centre cross, J=1.0 vertical numerals, K=.5 and L=1 horizontal marks (hanging below the line), M=1 gap to the post tip, N=2 the +/-2 and +/-20 marks, O=.8 horizontal numerals. Per model (ATACR 16x): H=0.15 line, I=0.344 post rail. 30 MOA scale below centre ('30 MOA scale: ATACR 4-16x42 F1, SHV 4-14x50 F1'); +10 above. Posts at 3, 6 and 9 o'clock, none at 12: a filled chevron tip at 21 (sides) / 31 (bottom), then a hollow channel of two I-thick rails with a fine centre line, solid from 31.46 (sides) / 36.67 (bottom), measured. Nightforce's current web table for MOAR F1 differs slightly in line/numeral weights (ATACR 16x: H .16, I .34, J 1.25); holds are identical. First focal plane: true at every magnification.
Verified 9 Oct 2026 against Nightforce NFO_MOAR_F1_20170620.pdf page 2, read as VECTOR at 4.3627 pt/MOA about the line crossing (fitted to the 1 MOA graduation). All 38 vertical and 38 horizontal marks drawn match the published rule in position (worst 0.12 MOA) and both ends, side included: horizontal marks hang below, vertical ones are centred. One artwork defect: the right half of the windage scale drifts long and the +20 mark is drawn at 20.57; the record uses the published A=40 / F=1. Measured: A/2 20.0 (left), +10 up, -30 down, the 2 MOA floating cross with stadia resuming at 2.0 (G), B 1.722, M 1.12 (side) / 1.17 (bottom), rail outer edge = B/2. H and I are the model's published weights (the drawing uses one generic weight). Numerals are vector outlines; positions measured (10/20 at y 2.8, 10/20/30 at x -3.21). Every lettered dimension A-O represented. Cross-checked by overlay.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Nightforce.