Reticle library · Nightforce
Drawn to scale from Nightforce’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 40 MOA — the part of the reticle you aim with. This reticle carries marks out to 60 MOA; the rest sits beyond the edge of this drawing.
Drawn from Nightforce Optics, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Nightforce MOAR-CF2 / MOAR-CF2D Reticle Sheet (REV 0720) page 2, MOAR-CF2D column, measured @ 16x, MOA: A=50 horizontal scale, B=0.095 line, C=1.0 the centred marks at +/-1, D=0.5 odd/even marks, E=2.0 the 5-MOA marks, F=0.5, G=1.0 pitch, H=2.0 same-side pitch, I=0.75 numeral height, J=0.6 32x numeral height, K=0.2 illuminated centre dot, L=0.5 gap from the dot to the lines, M=1.0 gap from the 25 mark to the post tip, N=0.86 and O=1.72 post. Odd MOA marks hang up (horizontal) / left (vertical), even ones down / right, as the sheet's text says; at every 5 MOA the line and its 2 MOA cross mark are broken +/-0.5 around a 0.2 illuminated dot (not at the end marks +/-25, +5, -40, which are plain 2 MOA marks). Vertical runs +5 to -40; no top or bottom post. Side posts: hollow chevron (drawn as a solid taper 26 to 27.93), rails at +/-0.71 (0.3 thick) with the fine line between, solid bar from 34.96. Second focal plane: 16x scale (numerals 5-25 / 5-40) with the 32x scale printed as the small numerals 2.5-12.5 / 2.5-20 (J=.6 at 16x); at 32x every subtension is half the 16x value. F=0.5 duplicates D (the sheet letters the same half-length mark twice).
Verified 9 Oct 2026 against Nightforce NF_MOAR-CF2_Reticle_Sheet (REV 0720, specs/nightforce/NF_MOAR-CF2_Reticle_Sheet.pdf) page 2, lower (MOAR-CF2D) drawing, read as VECTOR. Scale fitted by least squares to 77 axis marks: 4.0304 pt/MOA. All 45 vertical and 50 horizontal marks drawn match the odd-up-left / even-down-right rule in position (worst 0.118 MOA, artwork drift) and both ends, side included; every rule mark is drawn. The 1x1 MOA white knockouts were read off the sheet at every 5-MOA station and nowhere else. Measured against the table: A=50, L=0.5, B drawn 0.096, M 1.06, O 1.722, N (rail outer edge) 0.869; C, D, E by the mark rule; G, H by the pitch; I, J label sizes; K the dots. Numerals from the text layer. Post shoulder, rails and solid start measured (unpublished). Cross-checked by overlay (tools/nf_wave2_lib.crosscheck). Reference 16x from the sheet's 'Measured @' row.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Nightforce.