Reticle library · Nightforce
Drawn to scale from Nightforce’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 40 MOA — the part of the reticle you aim with. This reticle carries marks out to 60 MOA; the rest sits beyond the edge of this drawing.
Drawn from Nightforce Optics, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Nightforce FVR-1 Reticle Sheet (REV 0825) page 2: A=.1 MOA illuminated centre dot, B=.05 MOA crosshair, 'measured at maximum magnification' (36x). A plain fine crosshair running to the field edge; there are no hold marks. Lines beyond 10 MOA are post-type elements of the same .05 weight so the display frames the centre. Nightforce's NX6 6-36x56 product page lists FVR-1 as its reticle with 'Focal Plane: Second'.
Verified 9 Oct 2026 against Nightforce FVR-1 Reticle Sheet (REV 0825, specs/nightforce/FVR-1-Reticle-Sheet.pdf) page 2. The drawing is a raster ('Reticles not to scale'), used for structure only: full crosshair, unbroken, edge to edge on both axes, with a red (illuminated) dot at the crossing and nothing else in the field (read at 300 dpi). Both letters represented: A dot .1, B line .05, from the table. Reference magnification 36x from the sheet footnote.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Nightforce.