Reticle library · Nightforce
Drawn to scale from Nightforce’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 40 MOA — the part of the reticle you aim with. This reticle carries marks out to 60 MOA; the rest sits beyond the edge of this drawing.
Drawn from Nightforce Optics, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Nightforce 4A-i Reticle Sheet (REV 1025), page 2 table, 1-6x24 column, all values MOA 'measured at maximum magnification' (6x): A=2.8 heavy bar thickness, B=44 opening between the left and right bar tips, C=0.28 fine line, D=0.7 illuminated centre dot, E=22 centre to the bottom bar tip. Three bars (3, 6 and 9 o'clock), none at 12; above centre the fine line runs to the field edge and is carried as a post-type element of weight C so it does not set the display frame. Bars and the upper fine line are drawn to 60 MOA, i.e. off the field at 6x. Second focal plane: values hold at 6x only.
Verified 9 Oct 2026 against Nightforce 4A-i Reticle Sheet (REV 1025, specs/nightforce/4A-i-Reticle-Sheet.pdf) page 2. The drawing is a raster marked 'Reticles not to scale' and one drawing serves four scopes, so NOTHING is scaled off it: every dimension is the 1-6x24 column of the lettered table. Structure read from the drawing at 300 dpi: bars at 3, 6 and 9 o'clock only, inner ends square, the fine vertical continues to the top of the field, illuminated (red) centre dot, and the bottom bar tip drawn at exactly half the B opening (170.5 px against 171.5 px), which is what the table says for every column (E = B/2). All five letters A-E are represented. Reference magnification 6x from the sheet's footnote 'All subtensions measured at maximum magnification'.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Nightforce.