The numbers
- Manufacturer
- Vortex
- Reticle
- VMR-2 MRAD
- Focal plane
- second focal plane
- Units
- MRAD
- Magnification
- —
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Reticle library · Vortex
Vortex VMR-2 MRAD
Drawn to scale from Vortex’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Vortex Optics’s published specification.
Scopes with this reticle
- Viper PST Gen II 1-6x24 SFP
Other Vortex reticles
Subtensions
SFP; the sheet: subtensions 'correspond to the highest magnification' (6x). The centre dot is illuminated (drawn red). Published: line .15; posts .5 thick, side and bottom posts from 11; marks 1 and .65 long, 1 mil apart; centre dot .15. Drawn, not published (the sheet is to scale): windage marks at 1-4 each side and elevation marks at 1-7 below, .65 at odd mils and 1 at even; nothing above centre but the plain line, drawn the SAME .15 weight as below (the Razor sheet publishes a heavier .18 top line; this one does not). The centre dot is drawn 0.21; the record carries the published .15. Posts drawn to 12.5 mil (the sheet's frame is 11.9).
How this one was checked
Verified 8 Oct 2026 against specs/vortex/VTX_PST-1607_VMR-2_MRAD_RS_I_RI_ST.pdf page 1. Scale 15.0873 pt/mil from the side-post start, centre (198.425, 221.103) = the red centre dot; every published callout then lands except the centre dot, drawn oversized and recorded at its published diameter (listed in tools/build_vortex_vmr2_sheets.py). Geometry converted exactly from the single reticle outline - rectangles cut from its own vertices - so mark positions, lengths, centring and extents are the drawing's own.
Use it on your own rifle
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Vortex.