Reticle library · Vortex
Drawn to scale from Vortex’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Vortex Optics’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP. Manual: MOA values valid at highest magnification on most models — check the product manual for each SKU (12x / 16x / 24x). Published diagram: fine-line 0.15; long hash 1.5; short hash 0.7; inner posts ±18; bottom post −30; post weight 1.7. Text states 2 MOA hashmarks. A 4×2 MOA ranging box is drawn on the right horizontal arm. referenceMagnification left null because it differs by host scope. Reference magnification assumed = 16× (host scope's max, the usual SFP convention) — CONFIRM against the manual before marking verified.
Rebuilt and verified 11 Sep 2026 from the Vortex VMR-1 MOA reticle manual (VTX_M-00160-0), page 2 for subtensions and page 3 for usage. ⚠️ UNLIKE the Nightforce and ZeroTech sheets, this one states 'Reticle image shown for representation only', so the DRAWING IS NOT A MEASUREMENT SOURCE and no scale was fitted to it. Dimensions are the published labels: 0.15 line weight, 0.7 and 1.5 hash heights, 1.7 post, 18 MOA horizontal, 30 MOA vertical, and a 4 x 2 MOA grid cell. Page 3's text gives the interval: 'the VMR-1's 2 MOA hashmarks'. The drawing was used only for STRUCTURE — marks alternate tall/short at a uniform pitch with the tall ones twice as far apart — which puts a mark every 2 MOA, 1.5 tall on the multiples of 4 and 0.7 on the intermediate twos. The measured height ratio in the drawing is 2.0:1 against a published 2.14:1, and that agreement is what makes this reading safe rather than a guess. Second focal plane: the subtensions are valid at the scope's calibrated magnification, which differs per host and is a property of the scope, not of this geometry.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Vortex.