Reticle library · Vortex
Drawn to scale from Vortex’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Vortex Optics’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Benchrest fine crosshair. SFP; the sheet: 'subtensions measured in MOA and correspond to magnification at 40x' - NOT the 60x top of the zoom. Published: line 0.016. The sheet draws a plain crosshair to the edge of the field - no dot, no marks, no posts, no gap. Lines drawn to 40 MOA. Reticle image shown for representation only. Reticle image varies between riflescope models depending on magnification and reticle plane.
Verified 9 Oct 2026 against specs/vortex/VTX_TCS-1501_SCR-1_MOA_RS_I_RI_ST.pdf page 1 (re-downloaded from the source URL, byte-identical). The sheet's only figure is the 0.016 line weight and its only ink is two full-width lines (asserted in the builder); the record is exactly that. There is no second dimension to fit a scale to, and nothing else to compare.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Vortex.