Reticle library · Vortex
Drawn to scale from Vortex’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Vortex Optics’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP. Sheet: 'Most commonly, the MOA subtensions are valid at the highest magnification. Please check the Product Manual to confirm.' Reference magnification recorded as the host scope's maximum (12x) on that basis; the reticle sheet itself does not name a magnification per scope. Printed callouts: holdover hashes 1.5 / 4.5 / 7.5, top of bottom post 11, windage hashes 2 MOA apart, side posts start at 8. Measured off the chart (drawn to scale - the callouts land within 0.02 MOA): hashes are 0.6 total (0.3 each side of the line), top post also starts at 8, posts are 0.47 thick and end in a short chamfered point about 0.2 long (drawn as a taper into the post), fine line 0.15. Post thickness and line weight are drawn values, not published numbers. Class A/B/C yardage mappings are ballistic suggestions, not geometry. Do not confuse with Dead-Hold 2A BDC.
Compared against scratchpad/specs/vortex/vortex-dead-hold-bdc-moa-12x.pdf (VTX M-00240-1; the four Dead-Hold files on disk are byte-identical), PDF page 2 = printed pp 2-3 'Subtension Chart', rendered at 600 dpi. Scale calibrated on the 2 MOA windage hash pitch (67.2 px/MOA) and cross-checked on the 1.5/4.5/7.5 holdover hashes and the 8 MOA post tip, all within 0.02 MOA. Hash count and lengths, post tips (position and chamfer), post thickness and line weight measured. Geometry verified; the reference magnification is the sheet's general 'highest magnification' statement, not a per-scope figure.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Vortex.