Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP, true at 25x. Floating 0.04 mrad centre dot with a 0.5 mrad gap (stadia start 0.25 from centre). 0.02 mrad lines; marks every 0.5 mrad, 0.2 tall at the half mils and 0.4 at the whole mils; horizontal +-6, vertical +2 / -6; numerals 2, 4, 6. Whole reticle illuminated (red LED).
Verified 15 Oct 2026 against Tenmile_MRAD_Center_Dot_Reticle_3000011.pdf read as vector fills. Scale 43.40 pt/mrad from the 0.5-mrad mark pitch (21.70 pt; 24 horizontal + 16 vertical marks on the lattice to 0.01 mrad), closing the 6.0 MRAD, 2 MRAD and 0.5 MRAD (gap, 21.6 pt) dimension lines. Drawn sizes agree with every callout: marks 0.202 / 0.401 (0.2 / 0.4, centred), line 0.02 (0.02 MRAD), dot 0.042 (0.04 MRAD), gap 0.247 each side.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.