Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP, true at 9x. 0.125 MOA lines. Illuminated centre cross +-10 MOA on both axes with 1 MOA marks every 2 MOA and 2 MOA end marks at 10 (numerals 10). Ten 0.33 MOA dots on the diagonals below the line at (+-2,-2), (+-4,-4), (+-6,-6), (+-8,-8), (+-10,-10). Black horizontal line from 11 to 20 with 1 MOA marks at 12-18, then 1 MOA posts (drawn to 24; the sheet's artwork ends at 22.7). Black elevation line from 11 to 40 with 1 MOA marks every 2 MOA, 2 MOA marks at 20 and 30 (numerals 20, 30), and a 2 MOA wide post from 40 (drawn to 44; artwork ends 42.5).
Verified 15 Oct 2026 against Credo_MOA_Precision_Hunter_Reticle_2900039_2900040.pdf read as vector fills. Scale 8.60 pt/MOA from the 2 MOA mark pitch (17.20 pt, 20 horizontal + 24 vertical marks on the lattice to 0.06 MOA) and the 40 MOA (0 to -344 pt), 10 MOA (0 to +86) and 11 MOA (0 to -94.6, where the black section starts) dimension lines. Drawn sizes agree with every callout: line 0.122-0.125 (0.125 MOA x2), 2-MOA marks 1.000 tall (1 MOA), 10-MOA caps 2.000 (2 MOA), dots 0.330 (0.33 MOA), horizontal posts 1.000 thick from 19.94 (1 MOA), dot lattice exactly on the even MOA diagonals; lower post 2.00 wide from 40.00. Numerals 10/10/10/20/30 placed as printed.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.