Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 12 MRAD — the part of the reticle you aim with. This reticle carries marks out to 24 MRAD; the rest sits beyond the edge of this drawing.
Drawn from Trijicon, Inc.’s published specification.
In the first focal plane the subtensions hold true at every magnification, so a hold is a hold wherever the zoom ring sits.
FFP. 0.06 mrad lines, 0.14 floating centre dot with the stadia starting 0.25 from centre (0.25 GAP). Marks every 0.5 mrad, 0.2 tall at the half mils and 0.4 at the whole mils: horizontal +-12 (numerals 2-12), vertical +4 / -12; 0.6 mrad posts from 12.5 to 24 on the sides and from 12.5 below (drawn to 16, the sheet's artwork end). Hold tree on rows 1-12 mrad: 0.06 mrad dots every 0.2 mrad from 0.4 outward with a 0.08 mrad diamond at every whole mil; rows 1-2 end at +-2, rows 3-5 at +-3, rows 6-8 at +-4, rows 9-12 at +-6. Whole reticle illuminated except the posts. Drawing compromise: diamonds drawn as 0.08 dots.
Verified 15 Oct 2026 against Credo_MRAD_Precision_Tree_FFP_Reticle_2900038.pdf read as vector fills. Scale 12.57 pt/mrad from the 12 MRAD (0 to -150.9 pt), 12.5 MRAD (post tip) and 24 MRAD (post end) dimension lines and the 0.5-mrad mark lattice; 389 tree dots and 121 diamonds land on exact 0.2 / 1.0 multiples with row extents 2, 2, 3, 3, 3, 4, 4, 4, 6, 6, 6, 6 (drift <= 0.05 mrad at row 12). Callouts mapped: 2 / 4 MRAD vertical, 0.5 / 1 MRAD pitches, 0.2 / 0.4 marks, 0.06 line, 0.25 GAP (stadia ends measured at +-0.25), 0.14 centre dot (drawn 0.14), 0.06 dots (drawn 0.06), 0.08 diamond (drawn 0.112), 0.6 posts (drawn 0.6).
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.