Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP; sheet: 'Calibrations are shown at 16X'. 0.2 MOA crosshair with a 1.0 MOA gap around the 0.25 MOA illuminated PowerDot; 1 MOA marks at 5 and 10 on the windage line, 1 MOA posts from 15 (30 MOA tip to tip; posts drawn to 30). Elevation: fine line to +10; hold hashes 1 MOA wide at 2.24, 5, 8.32 MOA below centre and a 1 MOA post from 15 (the 15 MOA hold). MOA values as printed; no ballistic claim is made here.
Verified 15 Oct 2026 against CRHX1650-C-2900053_grs3351_Red_MOA_Hunter_Holds_measurements.pdf read as vector fills. Holds measured at 2.24, 5, 8.32 (printed 2.24, 5, 8.32) and the post from 15.0; hashes 1.04 wide (1 MOA), 0.23 thick (0.2 MOA), gap 1.0 (1.0 MOA GAP), dot 0.28 (0.25), windage marks at 5.0 / 10.0, line to 15 (15 / 30 MOA), posts 1.0 thick. Scale from the 5 MOA pitch and 15 MOA dimensions agrees within 2%; positions are the printed values.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.