Reticle library · Hawke
Drawn to scale from Hawke’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Hawke Sport Optics’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Hawke LR Dot (16x). SFP, subtensions true at 16x - Hawke: 'the LR Dot reticle markings were designed at 16x magnification'. PUBLISHED (info drawing): 0.625 MOA illuminated centre dot, crosshair stopping 2.3 MOA from centre all round (a square gap), hash marks at 5.6 and 9.63 MOA below centre, and heavy posts left, right and below from 14.32 MOA from centre (15 in at 100 yd). There is NO top post: the thin line runs on to the field edge. MEASURED off Hawke's CAD-exact drawing (not published, but every published figure lands on the drawing to 0.003 MOA): thin line 0.158 MOA, posts 0.8 MOA, hash marks 1.37 MOA long. Hawke frames the lower marks as 200-500 m aim points for a .308-class load; those are trajectory-dependent and are not drawn as ranges here.
Verified 8 Oct 2026 against Hawke's own vector drawing LR-Dot-16x.svg and its callout sheet LR-Dot-16x-info.svg, read with tools/svg_shapes.py (not a picture). centre (305.750,305.750), scale 6.8328 SVG units per MOA fitted to the published 14.32 MOA post; the other four callouts then land at hash 5.600 and 9.629 (published 5.6 and 9.63), gap 2.300 (2.3), dot 0.625 (0.625). All five published figures land within 0.003 MOA of the drawing, which is what makes its unpublished widths usable. Walked: outline (three posts, no top post), all marks (two hashes below centre only - none on the windage or above), no numerals, floating centre dot in a square 2.3 MOA gap, square post ends on all three posts, extents to the drawn field edge, every callout letter-for-letter. The callout sheet itself is a SCHEMATIC - its hashes sit at 5.9 and 10.1 MOA against its own labels of 5.6 and 9.63 - so it was used for the numbers only, never measured.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Hawke.