The numbers
- Manufacturer
- ZeroTech
- Reticle
- RAR
- Focal plane
- second focal plane
- Units
- MOA
- Magnification
- 1–10×
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Reticle library · ZeroTech
ZeroTech RAR
Drawn to scale from ZeroTech’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from ZeroTech Optics’s published specification.
Scopes with this reticle
- Vengeance 1-6x24 LPVO
- Vengeance 1-8x24 LPVO
- Vengeance 1-4x24 LPVO
- Thrive 1-10x24 LPVO
- Thrive HD 1-8x24 LPVO
Other ZeroTech reticles
Subtensions
Official: A=12 (horseshoe span), B=3 (inner gap), C=2, D=4, E=0.75 centre dot, F=0.2 thick fine, G=1.0 thick horseshoe, H=0.2 thick drop line, I=1, J=2, K=2, L=1, M=1 high, N=1.5, O=68 (lower post start), P=16 (inner to post), Q=4 post thickness, R=1 (horseshoe gap at 12 o'clock). Index lists all hosts as RAR Illuminated; spec does not state colour. Circle encoded as A=12 diameter horseshoe (open at top per R=1 gap).
How this one was checked
Rebuilt 11 Sep 2026 from ZeroTech's RAR spec sheet at 400 dpi. Scale 28.70 px/MOA, taken from the numbered ladder (8/12/16/20/24 at 114.8 px per 4 MOA) and confirmed independently by the horizontal marks landing symmetric at exactly +/-2, 4, 8, 10, 12, 14 and 16. MEASURED: ladder marks every 2 MOA to 24, crossbars 2.02 MOA on the fours and 1.01 on the twos, numerals to the LEFT; horizontal the same split to +/-16 with nothing at +/-6 because the horseshoe occupies it; horseshoe inner radius 5.75 MOA, 12 MOA across the stroke centre-line (A=12) at 1 MOA thick (G); centre dot 0.75 (E); side posts inner ends +/-25.35; lower post from 35.4 below centre at 4.04 thick (Q=4). Horseshoe settled against the sheet's own inset: there IS a real gap at 12 o'clock, and R=1 MOA is the half-gap from the arc end to the vertical, so 2 MOA total. Measured gap 80-100 degrees. The bottom opening runs 223.7 to 316.3 degrees, symmetric about straight down, found by locating both arc terminations directly. The apparent breaks at 3 and 9 o'clock ARE the black crosshair drawn over the red, and the arc continues through them. ⚠️ This sheet is a schematic, not a to-scale illustration like Nightforce's: the ring is drawn with a 0.51 MOA stroke against a published G=1 MOA, and its inner radius measures 5.80 where A=12 implies 5.50. Angles and mark POSITIONS are reliable (the ladder and the horizontal independently agree on 28.70 px/MOA); drawn THICKNESSES are not, so the dimension table is taken as the authority for stroke and the drawing for geometry. Letters O=68, P=16 and N=1.5 relate to the post callouts and are consistent with the drawing but are not separately represented as geometry.
Use it on your own rifle
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with ZeroTech.