Harson.ai

Reticle library · ZeroTech

ZeroTech PHR II

Drawn to scale from ZeroTech’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.

ZeroTech PHR II — second focal plane, MOA subtensions, 6–24×

Drawn from ZeroTech Optics’s published specification.

The numbers

Manufacturer
ZeroTech
Reticle
PHR II
Focal plane
second focal plane
Units
MOA
Magnification
6–24×

In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.

Subtensions

Official 6-24 column: L=0.50 M=0.16 N=0.16 O=0.16. Same hold geometry as PHR II 4-20 record.

How this one was checked

Rebuilt and verified 11 Sep 2026 from ZeroTech's PHR II spec sheet at 400 dpi. Scale 41.3 px/MOA from the four tree bars, with the fit's intercept landing on the crosshair row to within a quarter of a MOA rather than needing an offset. MEASURED: bar depths 10.23, 15.45, 20.31 and 25.23 MOA against the table's P/F/G/H = 10/15/20/25; bar widths 3.66, 5.62, 7.70 and 12.08 against Q/I/J/K = 3.5/5/7.5/12; heavy sections start at +/-5.06 on every arm (A=5); fine inner stadia run 0.7 to 3.25 from centre inside a C=1.1 clear centre. The horizontal carries NO hold marks — checked at 2.5, 5, 7.5, 10, 12.5, 15 and 20 MOA with a loosened threshold and every one returns bare line height. The lower arm is a fine line the tree hangs from, not a post; the post is on the other three arms. Per the rule established on the RAR, this is a ZeroTech schematic: positions are measured, thicknesses come from the table. The second bar's width draws 12% wide, which is drawing tolerance, so all four widths are taken from the table. This record is the Thrive HD 6-24x50 column: L=0.5, M/N/O=0.16.

Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with ZeroTech.