The numbers
- Manufacturer
- Schmidt & Bender
- Reticle
- P3
- Focal plane
- first focal plane
- Units
- MRAD
- Magnification
- —
In the first focal plane the subtensions hold true at every magnification, so a hold is a hold wherever the zoom ring sits.
Reticle library · Schmidt & Bender
Schmidt & Bender P3
Drawn to scale from Schmidt & Bender’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 12 MRAD — the part of the reticle you aim with. This reticle carries marks out to 41.4 MRAD; the rest sits beyond the edge of this drawing.
Drawn from Schmidt & Bender GmbH & Co. KG’s published specification.
Scopes with this reticle
- PM II 4-16x50
- Klassik 4-16x50
Other Schmidt & Bender reticles
Subtensions
First focal plane, mrad: four heavy posts with their tips 10 mrad apart, a thin cross between them, and a dot every 1 mrad (1 to 4) on all four arms. From S&B's dimensioned reticle data sheet for this scope. A 10 between the post tips, B 1 dot spacing, C 0.06 line, D 0.24 dot. The PM II and Klassik 4-16x50 sheets carry the same table and the same geometry. Post thickness (1.0) is not lettered; measured from the vector drawing. Posts and the upper line run to the edge of the field in the lowest-magnification view (41.4 mrad).
How this one was checked
Verified 8 Oct 2026 against Schmidt-Bender-Datasheet-P3-FFP-4-16x50-PMII and -Klassik.pdf, pages 2 and 3. Vector drawing, measured on fill geometry only. Page 2 centre from the crossing of the thin lines, scale from A (left/right post tips) = 28.416 (PM II) / 30.96 (Klassik) pt/mrad; page 3 lowest-magnification view the same way, 3.712 pt/mrad. Measured on both sheets: dots 0.238 at 1-4 on every arm, line 0.060, posts 1.00, tips 5.00; the two sheets' page 3 views are identical. The record was rasterised as the app draws it and XOR-compared with page 2 at 600 dpi: inside the page-2 frame nothing disagrees beyond 2 px except the sheet's own dimension arrowheads; the post and line extents beyond that frame were checked against the field edge on page 3 (re-checked 8 Oct 2026 in review). Dots at 1-4 mrad on all four arms, nothing between them; no numerals; post tips square.
Use it on your own rifle
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Schmidt & Bender.