Reticle library · Schmidt & Bender
Drawn to scale from Schmidt & Bender’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 12 MRAD — the part of the reticle you aim with. This reticle carries marks out to 25.4 MRAD; the rest sits beyond the edge of this drawing.
Drawn from Schmidt & Bender GmbH & Co. KG’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
Second focal plane, mrad, values at the scope's top magnification (the sheet's column for it): heavy posts left, right and below, thin cross, open top, illuminated centre dot. From S&B's dimensioned reticle data sheet for this scope. At 8x: A 14 between the post tips, B 0.5 post, C 0.08 line, D 0.19 dot (1x: 110.75 / 3.96 / 0.59 / 1.54; 4x: 28 / 1 / 0.15 / 0.39). The bottom post tip (7, = A/2) is not lettered; measured from the drawing. Posts and the upper line run to the edge of the field in the lowest-magnification view (25.4 mrad).
Verified 8 Oct 2026 against Schmidt-Bender-Datasheet-FD7-SFP-1-8x24-Exos.pdf, pages 2 and 3. Vector drawing, measured on fill geometry only. Page 2 centre from the crossing of the thin lines, scale from A (left/right post tips) = 14.714 pt/mrad; page 3 lowest-magnification view the same way, 9.194 pt/mrad. Drawn at 8x: post 0.499, line 0.077, dot 0.196. Page 3 is one view 'at all magnification'; field edge 25.4 at 8x. The record was rasterised as the app draws it and XOR-compared with page 2 at 600 dpi: inside the page-2 frame nothing disagrees beyond 2 px except the sheet's own dimension arrowheads; the post and line extents beyond that frame were checked against the field edge on page 3 (re-checked 8 Oct 2026 in review). No marks or numerals on this reticle; post tips square.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Schmidt & Bender.