The numbers
- Manufacturer
- Schmidt & Bender
- Reticle
- A7 fine
- Focal plane
- first focal plane
- Units
- MRAD
- Magnification
- —
In the first focal plane the subtensions hold true at every magnification, so a hold is a hold wherever the zoom ring sits.
Reticle library · Schmidt & Bender
Schmidt & Bender A7 fine
Drawn to scale from Schmidt & Bender’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Framed to about 12 MRAD — the part of the reticle you aim with. This reticle carries marks out to 60 MRAD; the rest sits beyond the edge of this drawing.
Drawn from Schmidt & Bender GmbH & Co. KG’s published specification.
Scopes with this reticle
- Zenith 3-12x50
Other Schmidt & Bender reticles
Subtensions
First focal plane, mrad: heavy posts left, right and below, thin cross, open top. From S&B's dimensioned reticle data sheet for this scope. A 14 between the post tips, B 0.67 post, C 0.067 line, D 7 down to the bottom post. Nothing measured beyond the field edge. The field at lowest magnification is 66.5 mrad; the thin line is drawn to 50 mrad and the posts to 60 here (app plausibility limits).
How this one was checked
Verified 8 Oct 2026 against Schmidt-Bender-Datasheet-A7-fein-FFP-3-12x50-Zenith.pdf, pages 2 and 3. Vector drawing, measured on fill geometry only. Page 2 centre from the crossing of the thin lines, scale from A (left/right post tips) = 17.389 pt/mrad; page 3 lowest-magnification view the same way, 2.074 pt/mrad. Measured: post 0.670, line 0.068, tips 7.00/7.00, bottom tip 7.00 (A, B, C, D). The record was rasterised as the app draws it and XOR-compared with page 2 at 600 dpi: inside the page-2 frame nothing disagrees beyond 2 px except the sheet's own dimension arrowheads; the post and line extents beyond that frame were checked against the field edge on page 3 (re-checked 8 Oct 2026 in review). No marks or numerals on this reticle; post tips square.
Use it on your own rifle
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Schmidt & Bender.